Before you actually start building doll house kits there are quite a few things you need to do. A question I am all the time asked is either you should paint a dolls house before you put it together, well you should paint the face before you put the house together but there are a few other things you need to do before that.
If you are going to have galvanic lighting in your doll house you should plan this before you start dolls house building. If you have an Mdf doll house you can very actually disguise the lighting wires by cutting small v shaped grooves in the floor of each room of your house to run the wires along. These can then be covered with carpeting so you can't see they are there. You need to plan your lighting and cut the grooves before dolls house building. You don't need to plan where every light will go but you need to have an idea of where you will place your lights.
Doll House
Before you start putting your doll house together you need to plan your lighting and paint your doll house. Some first wiring for your lights may need to go in before you put anyone together at all. All ceiling light will need to go in before the room above is decorated so you can cover up the wires with carpet. Wall lights can be put in one your rooms are unblemished by drilling a hole for the wire through the wallpaper and back wall.
When building your doll house make sure you use a strong glue and succeed the instructions very carefully.
How to Start building a Doll House from a Kit
ไม่มีความคิดเห็น:
แสดงความคิดเห็น